Lazer Lamps Triple-R 24 Elite - Gen2, Black

Triple-R Series: LED Driving Lights Developed based on the demands of professional motorsport, the LED lights of the Triple-R series set a new standard. The lights are available in five sizes from four to 28 LEDs, each with 11 watts of power, and in three versions. They have a full aluminum housing in black and, for some models, optionally in silver, a Gore-Tex ventilation membrane, and electronic temperature management, which ensures that the individual LEDs always operate in their optimal power range. The special vacuum-metallized reflectors further increase optical efficiency. The front is made of nearly indestructible polycarbonate. The spot beam pattern has been optimized for maximum range, in accordance with the demands of rally and endurance motorsport, where very high speeds are driven, by specially shaped reflectors for each individual LED. While the ST and T series lights also illuminate the roadside directly in front of the vehicle, the Triple-R lights are optimized for range and only achieve maximum side illumination from about half the range. Compared to the hybrid light distribution of the ST and T series, however, there is up to five times the brightness at the peak. Due to the mounting position of the LEDs and the indirect emission via the hood reflectors, there are fewer vertical changes in the light cone during driving. This results in better visibility in rain or fog compared to conventional headlights with LEDs in the center of the reflector. The careful tuning of the light temperature leads to sharper contrast boundaries and improves visibility. Triple-R Standard Series Like the ST and T series, the Triple-R Standard series models use 11-watt High Intensity LEDs. Triple-R 24 Elite LED Light Bar. Twenty-eight 11-watt LEDs. Range-optimized light distribution. For off-road use. With a luminous flux of 27060 lumens, the Triple-R 24 light is as powerful as nine xenon driving lights or almost 29 H4 halogen driving lights. The spot light distribution ensures an excellent range of approx. 2352 meters. The Triple-R 24 is designed not only for motorsport but also as an off-road light. Compared to the T-24, it illuminates wider only at a greater distance. If required, however, the beam angle can be increased by mounting one or more reeded lenses. Each reeded lens covers 4 LEDs. The light has a width of 1125 mm, a height of 73 mm, and a depth of 103 mm. The weight is 4.14 kg. Mounting is either via three sliding brackets that can be mounted at the top or bottom, or via two side brackets. All brackets are included. The connecting cable has a length of 70 cm. A cable set (1L-HP-300) with switch, relay, and fuse is included. All prices per piece. Compatible cable sets  LL-1L-HP-300 ECE approval Triple-R 750 to Triple-R 1250 models are approved as driving lights according to ECE regulations. Unique for an approved light is the E-Boost technology realized in Triple-R Elite models, an innovation that is found for the first time worldwide in Lazer Lamps. Outside of public road traffic, the light can be switched to full power by inserting the so-called Boost Cap. The range then increases, depending on the model, by up to 1500 meters. Due to the flexible configuration of the lights, they can be used both as legal driving lights and as LED light bars. The installation of an additional light bar can be omitted. The Triple-R lights with position light are also approved as position lights and driving lights according to ECE regulations. Reeded Lenses With the reeded lenses, the beam angle of the Triple-R lights can be increased from 5° to 10° to 30°, depending on the model, if required. This means that the lights can be used, for example, both on the road and in off-road use, where a wider beam is desired. If, for example, four lights are mounted in rally vehicles both horizontally and vertically as cornering lights, then two reeded lenses can illuminate the dark zones resulting from the mounting. The reeded lens is made of acrylic glass, covers 4 LEDs, and is attached with clamps. A seal prevents dirt and water from getting between the reeded lens and the light glass. The reeded lenses can also be mounted on lights with more than 4 LEDs, giving them a hybrid beam profile. Available in the following versions: 5° - 10° Variable Horizontal 15° Horizontal 30° Horizontal 15° Vertical (for vertically mounted lights) Yellow Reeded Lenses Yellow light provides better visibility in fog, rain, and snowfall. The reason for this is the approximately 15% reduced self-glare by reducing the shorter-wave blue and violet light components, as these are refracted more strongly than the longer-wave yellow light components. The yellow reeded lenses are made of acrylic glass, cover 4 LEDs, and are attached with four clamps. A seal prevents dirt and water from getting between the reeded lens and the light glass. The reeded lenses can also be mounted on lights with more than 4 LEDs, giving them a hybrid beam profile depending on the mounted model. Available in the following versions: 0° 15° Horizontal Mounting The Lazer Easy Mount system allows the lamps to be mounted in three different ways: upright, suspended, and sideways. The lights are waterproof according to IP67. Warranty Lazer Lamps provides a 5-year warranty on the lights.

Technical data

• ECE approval: No
• Luminous flux: 27,060 lumens
• Range: 2,352 m
• Weight: 4.14 kg
• Width: 111.25 cm
• Height: 10.3 cm
• Depth: 10.5 cm
• Color temperature: 5000 Kelvin
• Light series: Triple-R Series Elite 3