Lazer Lamps Triple-R 750 - Beacon

Triple-R Series: LED Driving Lights Developed based on the demands of professional motorsport, the LED lights of the Triple-R series set a new standard. The lights are available in five sizes from four to 28 LEDs, each with 11 watts of power, and in three versions. They have a full-aluminum housing in black and, for some models, optionally in silver, a Gore-Tex ventilation membrane, and electronic thermal management, which allows the individual LEDs to always operate within their optimal performance range. The special vacuum-metallized reflectors further increase optical efficiency. The front is made of nearly indestructible polycarbonate. The spot light beam has been optimized for maximum range according to the demands of rally and endurance motorsport, where very high speeds are driven, through specially shaped reflectors for each individual LED. While the ST and T series lights illuminate the roadside directly in front of the vehicle, the Triple-R lights are optimized for range and only achieve maximum side illumination from approximately half the total range. Compared to the hybrid light distribution of the ST and T series, however, the peak brightness value is up to five times higher. Due to the mounting position of the LEDs and the indirect emission via the hood reflectors, there are fewer vertical changes in the light cone during driving. This results in better visibility in rain or fog compared to conventional lights with LEDs in the center of the reflector. The careful tuning of the light temperature leads to sharper contrast limits and improves visibility. LED driving lights with E-mark. Four 11-watt LEDs. Range-optimized light distribution. For road use.   The iconic Triple-R series is upgraded for 2020/21. Featuring the latest high-efficiency LED technology, the Triple-R is a high-performance driving light that delivers a spot beam pattern suitable for both on-road and off-road applications. Subtle styling updates have resulted in a clean contemporary design, with a more aggressive edge to match the aesthetic design on modern vehicles. With the option of connecting a white or amber position light function, the styling and safety benefits of the second generation of Triple-R range are further enhanced. Triple-R 750 lights have a width of 230 mm, a height of 73 mm, and a depth of 105 mm. The weight is approximately 1 kg. Mounting is done via a central, sliding bracket that can be mounted at the top or bottom. A side mounting kit is optionally available. The connection cable has a length of 70 cm, and connectors are included. Optional connection cable sets are available. Compatible cable sets  LL-2L-LP-6C-350 for two lights ECE Approval Triple-R 750 to Triple-R 1250 models are approved as driving lights according to ECE regulations. Unique for an approved light is the E-Boost technology realized in Triple-R Elite (750, 850, 1000, and 1250) models, an innovation found for the first time worldwide in Lazer Lamps. Outside public roads, the light can be switched to full power by inserting the so-called Boost Cap. The range then increases, depending on the model, by up to 1500 meters. Due to the flexible configuration of the lights, they can be used both as legal driving lights and as LED light bars. The installation of an additional light bar can be omitted. The Triple-R lights with position lights are also approved as position lights and driving lights according to ECE regulations. Auxiliary Lenses With the so-called Reeded Lenses, the beam angle of the Triple-R lights can be increased from 5° to 10° to 30°, depending on the model, if required. This means that the lights can be used, for example, both on the road and in off-road use, where a wider beam is desired. For example, if four lights are mounted as cornering lights in both horizontal and vertical arrangements on rally vehicles, then two auxiliary lenses can illuminate the dark zones resulting from the arrangement. The Reeded Lens is made of acrylic glass, covers 4 LEDs, and is fastened with clamps. A seal prevents dirt and water from entering between the auxiliary lens and the headlight glass. The Reeded Lenses can also be mounted on lights with more than 4 LEDs, giving them a hybrid beam profile. Available in the following versions: 5° - 10° Variable Horizontal 15° Horizontal 30° Horizontal 15° Vertical (for vertically mounted lights) Yellow Auxiliary Lenses Yellow light provides better visibility in fog, rain, and snowfall. The reason for this is the approx. 15% reduced self-glare by reducing the shorter-wave blue and violet light components, as these are refracted more strongly than the longer-wave yellow light components. The yellow auxiliary lenses are made of acrylic glass, cover 4 LEDs, and are fastened with four clamps. A seal prevents dirt and water from entering between the auxiliary lens and the headlight glass. The auxiliary lenses can also be mounted on lights with more than 4 LEDs, giving them a hybrid beam profile depending on the mounted model. Available in the following versions: 0° 15° Horizontal Mounting The Lazer Easy Mount system allows the lamps to be mounted in three different ways: standing, hanging, and sideways. The lights are waterproof according to IP67. Warranty Lazer Lamps provides a 5-year warranty on the lights.