horntools Roof Rack NAVIS for Mitsubishi L200

NAVIS Modular Roof Rack System. (from model year 2016). The NAVIS roof rack was developed as a modular system. Made from high-quality aluminum, the roof rack is not only very light but also extremely rigid. Its high load capacity of 300 kg is unique in this segment. We chose airline fittings so that you can continue to use your fittings with our system. The NAVIS is designed to be so low profile that the overall height of the vehicle does not change compared to the original railing. We test every system on the vehicle until we are satisfied with the result and achieve our horntools quality. Please note: The roof rack system is only suitable for double cabs with original mounting options on the roof. Features: Fuel consumption & wind noise optimized by tube technology. Extremely low profile. Vehicle overall height does not change compared to the original railing*. Lighting mounts in the front panel for all common LED bars. 36 integrated airline attachment points. 6 mounting points for the carrier mount to distribute the weight evenly over the roof. Use of original mounting points (no drilling or cutting) – the carrier can be easily removed. Modular design – You can take your NAVIS roof rack with you when changing vehicles. High-quality powder-coated aluminum 5052. TÜV & vehicle manufacturer tested quality. Roof rack weighs only 12.5 kg. CAR SWAP - when changing vehicles, you only need new roof rack feet. Designed for roof tents & awnings. *For roof racks without railing and load. Small deviations possible depending on vehicle type. Please note: Static load capacity: 300 kg. Dynamic load capacity: 100 kg. The dynamic load capacity is not the manufacturer's approval. The manufacturer's load capacity must not be exceeded. The static load indicates the loading capacity when stationary. The dynamic load capacity refers exclusively to paved roads. The load must be evenly distributed over the surface. Tests and certificates: The roof racks have been tested by Mercedes-Benz for the X-Class and a manufacturer's approval has been granted. In addition, the NAVIS has a TÜV test. Each individual roof rack is inspected before powder coating and measured in a special jig. It is then assembled for testing. This ensures that every carrier fits. We drive countless kilometers - on & off-road, with & without load - to offer you a perfectly matched roof rack for your vehicle. We don't build generic products, but test every attachment system until it is perfectly adapted to your vehicle and works well. TEC-TALK: The roof rack was tested for noise and stability on various vehicles for approx. 1500 km during driving. The conclusion is that due to the round tube, the additional wind noise is minimal and not bothersome. From 120-140 km/h, wind noise becomes noticeably stronger with roof racks. In exceptional cases, louder wind noise or droning can occur, often due to tension in the carrier, as the vehicle and the carrier have manufacturing tolerances. In these cases, it usually helps to loosen the carrier again and assemble it without tension. If there is still bothersome wind noise, mounting a spoiler or additional LED lamps can help. Scope of delivery: Navis base carrier. Roof rack foot. Mounting material and installation instructions. Please note: large wind deflector (as shown in the pictures) not included. Available separately here.