horntools Herculiner 7m² UV protection for black Herculiner Topcoat

Herculiner Top Coat. Herculiner Topcoat is used to increase the UV protection of black Herculiner. Over the years, black Herculiner can gradually lighten (UV protection is already mixed into the other colors). To counteract this, there is Herculiner Top Coat. Application: Application on a new Herculiner coating:. The topcoat should be applied between 4 and 24 hours after applying Herculiner. The previously applied layer must be dry! This depends on the respective temperature. All surfaces must be clean, load-bearing and dry. If the Herculiner is heavily weathered, the Herculiner must be roughened, e.g., with a wire brush. Make sure the product is thoroughly stirred. One liter of Herculiner UV Topcoat Protectant covers up to 7 square meters. Herculiner UV Topcoat Protectant can be sprayed or rolled. When painting with a spray gun, Herculiner Top Coat can be thinned with up to 30% water. Facts:. Content: 0.94 liters. Quantity is sufficient for approx. 7 square meters. Hazard statements:. Signal word: Danger. H226-Flammable liquid and vapor. H332-Harmful if inhaled. H373-May cause damage to organs through prolonged or repeated exposure. H319-Causes serious eye irritation. H335-May cause respiratory irritation. H315-Causes skin irritation. H334-May cause allergy or asthma symptoms or breathing difficulties if inhaled. H317-May cause an allergic skin reaction. H351-Suspected of causing cancer