horntools Engine Skid Plate for Ford Ranger T6 & T7 (2011 - 2022)

The underbody protection, with a 4 mm wall thickness, was designed with reinforced areas at critical points to achieve maximum strength, essential for off-road vehicle use. All edges were welded, and the aluminum was then treated with cathodic dip painting to enhance the durability of the powder coating. We opted for powder coating to ensure a high-quality and visually appealing component on the vehicle. The service opening for the oil drain plug is marked and cut out. For off-road use, drainage and cleaning openings have been integrated to prevent mud and dirt from getting trapped in the underbody protection. We use 5052 aluminum, which is a higher quality aluminum than typically used for underbody protection. For mounting, we have prepared large cutouts to minimize installation time. Note: We have changed the coating on some of our products. Therefore, there may be discrepancies between already installed products and your new underbody protection. Attention: The engine underbody protection can only be installed in combination with the radiator underbody protection. For vehicles with a body lift, the underbody protection can only be installed if our winch system is in place. Technical specifications: Weight: approx. 4.5 kg. Material: Aluminum 5052. Coating: KTL/Powder coating