horntools Transfer Case Skid Plate for Ford Ranger T6 & T7 YOM 2011 - 2022

The underbody protection, with a wall thickness of 4 mm, was designed to be reinforced at relevant points to achieve the maximum strength required for off-road driving. We fully welded all the edges and then treated the aluminum with cathodic dip painting to make the powder coating last longer. We opted for powder coating to install a high-quality and visually appealing component on the vehicle. At the same time, the jacking points for the jack are clearly marked. The underbody protection has all relevant ventilation points for the transmission and the exhaust system. For off-road use, drainage and cleaning openings have been installed so that mud and dirt do not get trapped in the underbody protection. We use aluminum 5052, which is higher quality aluminum than what is usually used for underbody protection. For assembly, we have already prepared large access points to reduce installation time to a minimum. The transfer case underbody protection can only be installed in conjunction with the transmission underbody protection. Note: We have changed the coating on some of our products. Therefore, there may be deviations between already installed products and your new underbody protection. Technical data: Weight: approx. 5.5 kg. Material: Aluminum 5052. Coating: KTL/powder coating