Classic Alloy Wheel_B Black Matte Color:Black Matte|Offset:29|Rim Size:20
Classic Alloy Wheel_B Black Matte Color:Black Matte|Offset:29|Rim Size:20
Lieferzeit
Tesla Model Y Alloy Wheel Klassik_B Matte Black 20x9.5
The delta4x4 classic for the Tesla Model Y! Striking off-road design in matte black with robust beadlock style.
The wheel impresses with its massive appearance and high load capacity.
The beadlock ring is easily replaceable in case of damage and features the delta4x4 logo.
|
Approval |
TÜV certificate |
|
For |
Tesla Model Y |
|
Material |
Aluminum |
|
Suitable vehicle types |
Tesla Motors (USA) Type 003 – Model Y Tesla Motors (USA) Type 005 – Model Y |
|
Manufacturing |
Cast wheel |
|
Design |
one-piece with bolted ring |
|
Bolt circle |
5 x 114.3 mm |
|
Center bore |
64.1 mm |
|
Weight |
17.6 kg |
|
Notes: |
Matte black finish with black ring, silver bolts |
|
Winter suitability |
Yes |
|
Max. load capacity |
900 kg |
|
Possible tire sizes incl. conditions |
255/40 R20 – 101 (Conditions: 1, 2, 4, 5, 6, 7, 8, 9) |
|
Scope of delivery |
Rim, hub cap, 5 x bolts/nuts, TÜV certificate |
Conditions:
- Only tires and wheels of one manufacturer and type are permitted on the front and rear.
*) The required speed index can be found in the vehicle documents.
If the tire inflation pressure differs from the standard pressure, the driver must be informed in an appropriate manner (tire pressure sticker, supplementing the owner's manual). - Sufficient wheel coverage must be provided on the front and rear wheel arches by installing suitable parts or by other suitable measures. Depending on the vehicle's condition (e.g., vehicle lowering, wheel arch widening, etc.), it may be possible that the wheel coverage is sufficient.
- Depending on the basic vehicle equipment, speedometers with different revolution counts are assigned to a standard tire size. When using a tire size that is not yet listed in the vehicle documents, an adjustment may therefore be necessary.
- Clearance on the front axle must be established according to the enclosed mounting instructions.
- This wheel-tire combination is only permissible with 30 mm wheel spacers from Hofmann GmbH, identification: SPV-A05-30, according to expert opinion no.: 10-0224-A00-V11 of TÜV Pfalz dated 15.10.2018. (30 mm thick). Tested strength: 1000 kg at rolling circumference 2400 mm. The enclosed mounting instructions must be observed!
- Only permissible with the suspension lift kit from Delta 4x4 according to parts certificate no.: 20-00070-CP-BWG-xx. (30 mm lift) in the latest version. The respective parts certificates must be presented at the inspection.
- For vehicles with a tire pressure monitoring system (TPMS), the wheel sensors are installed in the special wheels according to the manufacturer's instructions. After wheel assembly, the system must be reinitialized according to the manufacturer's specifications.
- The use of snow chains is not permitted.
- The requirements of the directive for the testing of special wheels for motor vehicles and their trailers (as of 25.11.1998) in conjunction with VdTÜV leaflet 751 "Assessment of structural changes to M and N vehicles with special consideration of operational strength" (as of 04/2021) are met.
In particular, the following tests were carried out:
Strength test according to VdTÜV leaflet 751 (as of 04/2021)
